Home Repair
How to Patch Drywall Like a Pro (No Experience Needed)
Drywall damage happens — door knobs, furniture bumps, or accidental hits. Thankfully, repairing it is easy and inexpensive. This guide covers how to patch holes of any size.
Tools You Need
-
Putty knife
-
Joint compound
-
Sandpaper (120–220 grit)
-
Drywall patch / mesh tape
-
Utility knife
-
Paint
Small Holes (Nail Holes / Tiny Dents)
Fix:
-
Apply a small amount of joint compound.
-
Smooth with putty knife.
-
Let dry.
-
Sand lightly.
-
Paint.
Medium Holes (1–3 Inches)
Fix:
-
Stick mesh patch over hole.
-
Apply two thin layers of compound.
-
Sand smooth.
-
Paint to match.
Large Holes (3 Inches or Bigger)
Fix:
-
Cut a square around damaged area.
-
Insert backing board behind the hole.
-
Screw in a drywall patch piece.
-
Tape seams.
-
Apply three coats of compound.
-
Sand and paint.
Pro Tips
-
Always feather compound outward for smoother blending.
-
Don’t rush sanding.
-
Use primer for best finish
How to Stop a Running Toilet: Step-by-Step Fix Anyone Can Do
A running toilet is one of the most common and annoying household problems. Luckily, it’s also one of the easiest to fix. This guide covers the causes, the tools you need, and the exact steps to stop the constant water flow.
Common Causes
-
Worn-out flapper
-
Faulty fill valve
-
Loose chain
-
Incorrect water level
Tools You Need
-
Adjustable wrench
-
Replacement flapper ($5–$12)
-
Towel
Step-by-Step Fix
1. Remove the Tank Lid
Set it aside carefully.
2. Inspect the Chain
If it’s too long, it can get stuck under the flapper.
Fix: Shorten the chain one link at a time.
3. Replace the Flapper (Most Common Fix)
-
Turn off the shutoff valve.
-
Flush to empty the tank.
-
Remove the old flapper.
-
Install the new one.
-
Turn water back on.
4. Adjust the Water Level
Ideally, water should sit about 1 inch below the overflow tube.
5. Check the Fill Valve
If the valve doesn’t stop filling, it may need replacing.
When to Call a Plumber
-
Cracked tank
-
Internal valve damage
-
Repeated running after flapper replacement
Top Selling Coil Roof Nailer
The WEN 61783 is a dependable, easy-to-use roofing nailer that works well for shingle installations, roof repairs, and small exterior projects. It accepts 3/4” to 1-3/4” coil roofing nails, giving you enough range for most DIY and light professional jobs.
The tool fires consistently with minimal jams, and the depth adjustment is simple, letting you control how deep each nail sits. It’s lightweight for a roofing nailer, and the rubberized grip helps reduce hand fatigue—important when you’re working on a roof for hours.
While it isn’t built for heavy, everyday contractor use, it’s an excellent choice for homeowners who want a reliable and affordable roofing nailer that gets the job done without overcomplicating things.